# Machine steps not saving **URL:** \ **Category:** Flow Classic\ **Created:** [January 11, 2023, 10:03am UTC](https://forum.novacura.com/t/machine-steps-not-saving/374 "2023-01-11T10:03:33Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![jdoherty](https://avatars.discourse-cdn.com/v4/letter/j/7C9FD7/32.png) [@jdoherty](https://forum.novacura.com/u/jdoherty)\ **Post date:** [January 11, 2023, 10:03am UTC](https://forum.novacura.com/t/machine-steps-not-saving/374/1 "2023-01-11T10:03:33Z")
![Cap](https://europe1.discourse-cdn.com/flex013/uploads/novacuratalk/original/1X/31989ed299c76a055d43516777da2c2299a49049.jpeg) Hi, I have a problem on the DEV and PROD versions of Flow Studio; when I create a new machine step or edit an existing one I am unable to save the changes. The OK button doesn’t work, the step stays on the screen when I click OK and any changes I make are not saved (see attached screen cap). I can only close it by clicking on the X in the top right-hand corner of the step. The version of Flow Studio I am using is 6.13.17.40064 It is occurring on all machines with Flow Studio. Can anyone help? ---
**Author:** ![jdoherty](https://avatars.discourse-cdn.com/v4/letter/j/7C9FD7/32.png) [@jdoherty](https://forum.novacura.com/u/jdoherty)\ **Post date:** [January 11, 2023, 11:30am UTC](https://forum.novacura.com/t/machine-steps-not-saving/374/2 "2023-01-11T11:30:49Z")
This has stopped happening and is OK now. ---
**Author:** ![OlaCarlander](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.novacura.com/olacarlander/32/205_2.png) [@OlaCarlander](https://forum.novacura.com/u/OlaCarlander)\ **Post date:** [January 12, 2023, 5:47pm UTC](https://forum.novacura.com/t/machine-steps-not-saving/374/3 "2023-01-12T17:47:26Z")
Glad to hear. It was not as simple as that the workflow was not in edit mode last time? ---
**Author:** ![jdoherty](https://avatars.discourse-cdn.com/v4/letter/j/7C9FD7/32.png) [@jdoherty](https://forum.novacura.com/u/jdoherty)\ **Post date:** [January 13, 2023, 8:56am UTC](https://forum.novacura.com/t/machine-steps-not-saving/374/4 "2023-01-13T08:56:09Z")
No unless I am going crazy, it definitely was in Edit mode but my changes were not saving. I could add a machine step to a flow but when I added code to it, it would not save. It is back to normal now though.